25APR

FLORAM receives Impact Factor

We are pleased to announce that FLORAM has received its first impact factor rating in the 2022 Journal Citation Reports (JCR).

Now FLORAM has the highest impact factor among Brazilian Forest Sciences journals.
Floresta e Ambiente
https://www.floram.org/article/doi/10.1590/2179-8087-FLORAM-2021-0101
Floresta e Ambiente
Original Article Forest Products Science and Tecnology

Technological Properties of Medium Density Particleboards Produced with Peanut (Arachis Hypogaea) and Pinus Oocarpa Hulls

Flávia Maria Silva Brito, Bianca Andrade Silva, Iara Marques de Carvalho, Sofia Baldoni Baúti, Lourival Marin Mendes, José Benedito Guimarães Júnior

http://dx.doi.org/10.1590/2179-8087-FLORAM-2021-0101 FLORAM, vol.29, n2, e20210101, 2022
PDF
PDF
SciELO
Downloads: 0
Views: 452

Abstract

Peanut crop waste (hulls), which have a chemical composition similar to wood, can be considered as a source of industrial raw material for the production of particleboard, provided that they are of similar quality to wooden panels. The present study aimed to produce and evaluate the physical and mechanical properties of medium density particleboards made of peanut hulls and pine wood particles bonded with urea-formaldehyde adhesive. The panels did not present satisfactory dimensional stability. The mechanical properties were significantly reduced with the addition of peanut hulls. In general, peanut hulls did not represent a good alternative to be used as a source of raw material for the production of particleboard. The inclusion of new parameters in the production process would be essential to improve the technological properties, such as: new particle geometries, use of paraffin, particle treatments and inclusion of denser species in the composition of the panels.

Keywords

Wood; particle mixture; technological properties; compression ratio; waste

References

  • Associação Brasileira De Normas Técnicas. (2017). ABNT NBR 13999 - Papel, cartão, pastas celulósicas e madeira - Determinação do resíduo (cinza) após a incineração a 525°.

  • Associação Brasileira De Normas Técnicas. (2010 a). ABNT NBR 14583 - Madeira - determinação do material solúvel em etanol-tolueno e em diclorometano e em acetona.

  • Associação Brasileira De Normas Técnicas (2010 b). ABNT. NBR 7989 - Pasta celulósica e madeira - Determinação de lignina insolúvel em ácido.

  • Barbirato, G., Fiorelli, J., Barrero, N. G., Pallone, E. M. J.A., Lahr, F. A. R. L., Cristoforo, A. L., & Savastano Junior, H (2014). Painel aglomerado híbrido de casca de amendoim reforçado com partículas de madeira itaúba. Ciência Florestal, 24(3), 685-697. doi: https://doi.org/10.1590/1980-509820142403016
    » https://doi.org/https://doi.org/10.1590/1980-509820142403016

  • Brito, F. M. B., Bortoletto Júnior, G (2019). Thermal modification of sugarcane waste and bamboo particles for the manufacture of particleboards. Revista árvore, 43(1), e430112. doi: http://dx.doi.org/10.1590/1806-90882019000100012
    » https://doi.org/http://dx.doi.org/10.1590/1806-90882019000100012

  • Brito, F. M.S., Bortoletto Júnior, G., Paes, J. B., Belini, U. L., & Tomazello-Filho, M (2020). Technological characterization of particleboards made with sugarcane bagasse and bamboo culm particle. Constriction and Building Materials, 62, e 120501. Doi: 10.1016/j.conbuildmat.2020.120501.
    » https://doi.org/10.1016/j.conbuildmat.2020.120501.

  • Bufalino, L., Abino, V. C. S., Sá, V. A., Correa, A. A. R., Mendes, L. M.; & Almeida, N. A (2012). Particleboards made from Australian red cedar: processing variables and evaluation of mixed species. Journal of Tropical Forest Science, 24 (2), 162-172.

  • Brito, F. M. S., Silva, P. X. S., Palumbo, S. K. C., Guimarães Júnior, J. B., & Mendes, L.M (2021). Technological characterization of particleboards constituted with pistachio shell (Pistacia vera) and Pinus oocarpa wood. Revista Brasileira de Ciências Agrárias, 16(2), e8902. doi:10.5039/agraria.v16i2a8902.
    » https://doi.org/10.5039/agraria.v16i2a8902

  • Carvalho, A. G., Andrade, B. G., Donato, D. B., Silva, C. M. S., Carneiro, A. C. O., Castro, V. R., & Zanuncio, A. J. V. (2020). Bonding performance of structural adhesives on heat-treated mimosa scabrella and pinus oocarpa wood. Cellulose Chemistry and Technology, 54(7-8), 663-668.

  • Companhia Nacional de Abastecimento. Acompanhamento. Acompnhamento da Safra Brasileira - CONAB. (2021). Safra 2020/21, v. 8, n. 12, 12° levantamento. Brasília. https://www.conab.gov.br
    » https://www.conab.gov.br

  • Duc, P. A., Dharanipriya, P., Velmurugan, B. K., & Shanmugavadivu, M. (2019). Groundnut shell - a beneficial bio-waste. Biocatalysis and Agricultural Biotechnology, 20, 101206. doi: https://doi.org/10.1016/j.bcab.2019.101206.
    » https://doi.org/https://doi.org/10.1016/j.bcab.2019.101206.

  • Dourado, D. C., Tavares, E. L., Stroparo, E. C., Souza, K.V., Hillig, E., & Schirmer, W. N. (2017). Avaliação das propriedades físicoquímicas de resíduos lignocelulósicos provenientes da produção do biodiesel. Revista Espacios, 38 (26).

  • Eroglu, H. (1988). Fiberboard Industry. Karadeniz Technical University Publication, n 304, Trabzon, Turkey.

  • Federação das Indústrias do Estado de São Paulo - FIESP. (2021). Agronegócio do amendoim no Brasil. 32 p. 2021. file:///D:/Downloads/file-20210531120131-agronegocio-do-amendoimproducao-transformacao-e-op%20(5).pdf.

  • Furtini, A. C. C., Santos, C. A., Garcia, H. V. S., Brito, F. M. S., Santos, T. P., Mendes, L. M., & Guimarães Júnior, J. B. (2021). Performance of cross laminated timber panels made of Pinus oocarpa and Coffea arabica waste. Coffee Science, e161854. doi: 10.25186/.v16i.1854.
    » https://doi.org/10.25186/.v16i.1854.

  • Gatani, M.P., Fiorelli, J., Medina, J.C., Arguello, R., Ruiz, A., Nascimento, M.F., & Savastano, H. (2013). Viabilidade técnica de produção e propriedades de painéis de partículas de casca de amendoim. Revista Matéria (Rio J), 18(2), 1286-1293. doi:10.1590/S1517-70762013000200004..
    » https://doi.org/10.1590/S1517-70762013000200004

  • Guler, C., Copur, Y., & Tascioglu, C. (2008). The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigra Arnold) wood chips. Bioresources Technology, 99, 2893-2897. Doi:10.1016/j.biortech.2007.06.013.
    » https://doi.org/10.1016/j.biortech.2007.06.013

  • Gueye, M., Richardson, Y., Kafack, F. T., Blin, J. (2014). High efficiency activated carbons from African biomass residues for the removal of chromium (VI) from waste water. Journal of Environmental Chemical Engineering, 2(1), 273-281. doi: 10.1016/j.jece.2013.12.014
    » https://doi.org/10.1016/j.jece.2013.12.014

  • Guimarães Junior, J. B., Xavier, M. M., Santos, T.S., Protásio, T. P., Mendes, R.F., & Mendes, L.M. (2016). Inclusão de resíduo da cultura de sorgo em painéis aglomerados de eucalipto. Pesquisa Florestal Brasileira, 36 (88), 435-442. https://doi.org/10.4336/2016.pfb.36.88.1036.
    » https://doi.org/https://doi.org/10.4336/2016.pfb.36.88.1036

  • Iwakiri, S., Zeller, F., Pinto, J. A., Ramirez, M. G. L., M. M. Souza., Seixas, R. (2010). Avaliação do potencial de utilização da madeira de Schizolobium amazonicum “Paricá” e Cecropia hololeuca “Embaúba” para produção de painéis aglomerados. Acta amazônica, 40 (2), 303-308. https://doi.org/10.1590/S0044-59672010000200008.
    » https://doi.org/https://doi.org/10.1590/S0044-59672010000200008

  • Iwakiri, V. T., Trianoski, R., Razera, D. L., Iwakiri,S., & Rosa, T. S. (2019). Production of Structural Particleboard of Mimosa Scabrella Benth with Lignin Phenol-formaldehyde Resin. Floresta e Ambiente, 26, e20171006. doi: 10.1590/2179-8087.100617
    » https://doi.org/10.1590/2179-8087.100617

  • Maloney, T. M. (1993). Modern particleboard e dry-process fiberboard manufacturing. 2nd ed. Sao Francisco: Miller Freeman Publication.

  • Moslemi, A. A. (1974). Particleboard. London: Southern lllinois University Press.

  • Modes, K. S., Ludwig, R. L., Vivian, M. A., & Stolberg, J. (2019). Wood quality of Pinus patula schltdl & cham for the pulp production. Revista Árvore, 43(2), e430207. doi: 10.1590/1806-90882019000200007.
    » https://doi.org/10.1590/1806-90882019000200007.

  • Machado, N. A. F., Furtado, M. B., Parra-Serrano, L. J., Parente, M. O. M. Fiorelli, J., Savastano Júnior, H. (2017). Painéis aglomerados fabricados com resíduos do coco babaçu. Revista Brasileira de Ciências Agrárias , 12 (2), 202-209. doi: org/10.5039/agraria.v.12i2a5434.
    » https://doi.org/org/10.5039/agraria.v.12i2a5434.

  • Nasser, S. M., Morales, E. A.M., Pereira, L. E.R, Eugenio, R. A. P., Biazzon, J. C., Lima,M. P., Bueno, M . A. P., Archangelo, A., Celestino, V. R. B., Nasser, H. M., Dias, L. G., Munhoz, M. R., Gonçalves, G. J. C., Breganon,R., & Valarelli, I. D. (2020). Mechanical Analysis of Bamboo and Agro-industrial Residue One-layer Particleboard. BioResources, 15(2), 2163-2170.

  • Narciso, C. R. P., Reis, A. H.S., Mendes, J. F., NOGUEIRA, N. D., & Mendes, R. F. (2020). Potential for the use of coconut husk in the production of medium density particleboard. Waste Biomass Valorization, 12, 1647-1658. Doi: 10.1007/s12649-020-01099-x.
    » https://doi.org/10.1007/s12649-020-01099-x.

  • Pinati, E., Faria, D. L., Mendes, R. F., Mendes, L. M. , Protásio, T. P., Guimarães Júnior, J. B. (2018). Painéis compensados sarrafeados produzidos com Pinus oocarpa, Castilla uleie Acrocarpus fraxinifolius. Ciência da Madeira, 9(3), 199-208. doi: 10.12953/2177-6830/rcm.v9n3p199-208x.
    » https://doi.org/10.12953/2177-6830/rcm.v9n3p199-208x.

  • Protásio, T. P., Bufalino, L. , Tonoli, G. H. D., Guimarães Junior, M., Trugilho, P. F., & Mendes, L. M. (2013). Brazilian lignocellulosic wastes for bioenergy production: characterization and comparison with fossil fuels. Bioresources, 8 (1), 1166-1185. doi: 10.15376/biores.8.1.1166-1185.
    » https://doi.org/10.15376/biores.8.1.1166-1185.

  • Silveira, L. H. C., Rezende, A. V., & Vale, A. T. (2013). Teor de umidade e densidade básica da madeira de nove espécies comerciais amazônicas. Acta Amazônica, 43(2), 179-184. https://doi.org/10.1590/S0044-59672013000200007.
    » https://doi.org/https://doi.org/10.1590/S0044-59672013000200007

  • Soares, S. S., Guimarães Júnior, J. B., Mendes, L. M. , Mendes, R. F., Protásio, T. P., & Lisboa, F. J. N. (2017). Valorização do bagaço de cana-de-açúcar na produção de painéis aglomerados de baixa densidade. Ciência da Madeira , 8 (2), 64-73. doi: 10.12953/2177-6830/rcm.v8n2p64-73.
    » https://doi.org/10.12953/2177-6830/rcm.v8n2p64-73.

  • Yano, B. B. R., Silva, S. A. M., Almeida, D. H., Aquino, V. B. M., Christoforo, A. L., Rodrigues, E. F. C., Carvalho Junior, N., Silva, A. P., & Lahr, F. A. R. (2020). Use of Sugarcane Bagasse and Industrial Timber Residue in Particleboard Production. BioResources , 15(3), 4753-4762.

  • Zaaba, N. F., & Ismail, H. A Review on Peanut Shell Powder Reinforced Polymer Composites (2018): A Review on Peanut Shell Powder Reinforced Polymer Composites, Polymer-Plastics Technology and Engineering, 58, 349-365 doi: 10.1080/03602559.2018.1471720.
    » https://doi.org/10.1080/03602559.2018.1471720.

  • Zheng, W., Phoungthong, K., Lu, F, Shao, L., & He, P. (2013). Evaluation of a classification method for biodegradable solid wastes using anaerobic degradation parameters. Waste Management, 33, 2632-2640. doi:10.1016/j.wasman.2013.08.015.
    » https://doi.org/10.1016/j.wasman.2013.08.015

Submitted date:
12/23/2021

Accepted date:
05/03/2022

62c2d852a953955d8c2ccbf3 floram Articles
2179-8087 (Electronic)
FLORAM ©2024 All rights reserved.

FLORAM

Share this page
Page Sections