25APR

FLORAM receives Impact Factor

We are pleased to announce that FLORAM has received its first impact factor rating in the 2022 Journal Citation Reports (JCR).

Now FLORAM has the highest impact factor among Brazilian Forest Sciences journals.

Floresta e Ambiente
https://www.floram.org/article/doi/10.1590/2179-8087.004819
Floresta e Ambiente
Original Article Wood Science and Technology

Juvenile Wood from Pinus patula Schltdl & Cham for Multilaminated Panel Production

Everton Lorenzett Tavares; Everton Hillig; Andrea Nogueira Dias; Antonio José Vinha Zanuncio; Edson Luis Serpe

Downloads: 1
Views: 849

Abstract

ABSTRACT: Wood scarcity, attacks by primates and insects, and fungal damage in forest plantations make the introduction of new species necessary. Given this, it is important to understand the potential uses of wood in the production chain. Pinus patula Schltdl & Cham presents good adaptation to Brazilian conditions and is a candidate for wood supply. Its juvenile wood density however, is lower than that of other pine species. This study aimed to evaluate the properties of veneer on panels produced with twelve-year old P. patula wood compared with panels produced with P. taeda wood of the same age, which is commonly used for panel production. Panels were bonded with urea-formaldehyde and phenol-formaldehyde adhesives using veneers applied on two types of plywood panel. The P. patula panels showed lower strength, stiffness and density when bonded with urea-formaldehyde, and higher strength, density and stiffness when bonded with phenol-formaldehyde in comparison with P. taeda. P. patula panels can be used for multilayer panel production.

Keywords

phenol-formaldehyde, urea-formaldehyde, Pinus taeda, plywood, veneers

References

Aguiar AV, Sousa VA, Shimizu JY. Espécies de pinus mais plantadas no Brasil. In: Aguiar AV. Cultivo de pinus. 2. ed. Brasília: Embrapa Florestas; 2014. 13 p. (Sistema de Produção, no. 5).

Almeida DH, Ferro FS, Varanda LD, Souza AM, Icimoto FH, Christoforo AL et al. Quality control in plywood manufacturing: physical properties of commercial plywood of Pinus sp. International Journal of Composite Materials 2013; 3: 163-167. http://dx.doi.org/10.5923/j.cmaterials.20130306.04.

Almeida NF, Bortoletto G Jr, Mendes RF, Surdi PG. Produção e avaliação da qualidade de lâminas de madeira de um híbrido de Pinus elliottii var. elliottii × Pinus caribaea var. hondurensis. Floresta e Ambiente 2014; 21(2): 261-268. http://dx.doi.org/10.4322/floram.2014.022.

Associação Brasileira da Indústria da Madeira Processada Mecanicamente – ABIMCI. Compensado de pinus. Curitiba: ABIMCI; 2002. 24 p. (Catálogo Técnico, no. 1).

Aydin İ, Çolak S, Çolakoğlu G, Salih E. A comparative study on some physical and mechanical properties of laminated veneer lumber (LVL) produced from Beech (Fagus orientalis Lipsky) and Eucalyptus (Eucalyptus camaldulensis Dehn.) veneers. Holz als Roh- und Werkstoff 2004; 62(3): 218-220. http://dx.doi.org/10.1007/s00107-004-0464-3.

Campos CI, Morais RDV, Nascimento MF. Caracterização físico-mecânica de painéis de madeira compensada produzidos com Pinus sp. e resina poliuretana bicomponente. Madeira: Arquitetura e Engenharia 2009; 10(24): 37-50.

Costa MA, Del Menezzi CHS. Effect of thermo-mechanical treatment on properties of parica plywoods (Schizolobium amazonicum Huber ex Ducke). Revista Árvore 2017; 41(1): e410115. http://dx.doi.org/10.1590/1806-90882017000100015.

Folmann WT, Miranda GM, Dias AN, Moro FC, Fernandez MLQ. Viabilidade de projetos florestais em três regimes de manejo na mesorregião centro-oriental do Paraná. Floresta 2014; 44(1): 153-160. http://dx.doi.org/10.5380/rf.v44i1.30096.

Guimarães JB Jr, Protásio TP, Mendes RF, Mendes LM, Guimarães BMR, Siqueira HF. Qualidade de painéis LVL produzidos com madeira de clones de Eucalyptus urophylla. Pesquisa Florestal Brasileira 2015; 35(83): 307-313. http://dx.doi.org/10.4336/2015.pfb.35.83.797.

Iwakiri S, Matos JLM, Pinto JA, Viana LC, Souza MM, Trianoski R et al. Produção de painéis laminados unidirecionais - PVP com lâminas de Schizolobium amazonicum, Eucalyptus saligna e Pinus taeda. Cerne 2010; 16(4): 557-563. http://dx.doi.org/10.1590/S0104-77602010000400015.

Iwakiri S, Olandoski DP, Leonhardt G, Brand MA. Produção de chapas de madeira compensada de cinco espécies de pinus tropicais. Ciência Florestal 2001; 11(2): 71-77. http://dx.doi.org/10.5902/198050981656.

Iwakiri S, Sanches FG, Potulski DC, Silva JB, De Andrade M, Marchesan R. Avaliação do potencial de uso de espécies de Pinus tropicais e Eucalipto na produção de painéis compensados ureicos. Floresta 2012; 42(2): 277-284. http://dx.doi.org/10.5380/rf.v42i2.20657.

Liebsch D, Moreira JMMÁP, Oliveira EB, Mikich SB. Impacto do descascamento de árvores de Pinus taeda L. por macacos-prego na produção e receita em plantios com desbastes. BIOFIX Scientific Journal. 2018; 3(1): 48-55. http://dx.doi.org/10.5380/biofix.v3i1.56574.

Lima NN, Mendes LM, Sá VA, Bufalino L. Propriedades físico-mecânicas de painéis PVP produzidos com três espécies amazônicas. Cerne 2013; 19(3): 407-413. http://dx.doi.org/10.1590/S0104-77602013000300007.

Melo RR, Del Menezzi CHS. Influence of veneer thickness on the properties of LVL from Paricá (Schizolobium amazonicum) plantation trees. European Journal of Wood and Wood Products 2014; 72(2): 191-198. http://dx.doi.org/10.1007/s00107-013-0770-8.

Mendoza ZMSH, Borges PHM, Santos EA, Penna JE, Elias MPS, Morais PHM. Estudo comparativo das propriedades físicas e mecânicas de painéis compensados e laminated veneer lumber (LVL). Nativa (Sinop) 2017; 5: 588-593. http://dx.doi.org/10.5935/2318-7670.v05nespa19.

Müller MT, Haselein CR, Melo RRD, Stangerlin DM. Influência de diferentes combinações de lâminas de Eucalyptus saligna e Pinus taeda em painéis PVP. Ciência Florestal 2015; 25(1): 153-164. http://dx.doi.org/10.5902/1980509817473.

Palermo GPM, Latorraca JVF, Severo ETD, Nascimento AM, Rezende MA. Delimitação entre os lenhos juvenil e adulto de Pinus elliottii Engelm. Revista Árvore 2013; 37(1): 191-200. http://dx.doi.org/10.1590/S0100-67622013000100020.

Purba CYC, Pot G, Viguier J, Ruelle J, Denaud L. The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood. European Journal of Wood and Wood Products 2019; 77(3): 393-404. http://dx.doi.org/10.1007/s00107-019-01400-3.

Ross RJ. Wood handbook: wood as an engineering material. Wisconsin: USDA; 2010. 509 p. General Technical Report Fpl-gtr-190.

Sánchez-González A. Una visión actual de la diversidad y distribución de los pinos de México. Madera y Bosques 2008; 14(1): 107-120. http://dx.doi.org/10.21829/myb.2008.1411222.

Santiago-García W, Los Santos-Posadas D, Manuel H, Ángeles-Pérez G, Valdez-Lazalde JR, Corral-Rivas JJ et al. Modelos de crecimiento y rendimiento de totalidad del rodal para Pinus patula. Madera y Bosques 2015; 21(3): 95-110.

Silva BCD, Vieira MC, Oliveira GDL, Gonçalves FG, Rodrigues ND, Lelis RCC et al. Qualidade de compensados fabricados com adesivos à base de tanino-formaldeído de Pinus oocarpa e fenol-formaldeído. Floresta e Ambiente 2012; 19(4): 511-519. http://dx.doi.org/10.4322/floram.2012.057.

Tenorio C, Moya R, Muñoz F. Comparative study on physical and mechanical properties of laminated veneer lumber and plywood panels made of wood from fast-growing Gmelina arborea trees. Journal of Wood Science 2011; 57(2): 134-139. http://dx.doi.org/10.1007/s10086-010-1149-7.

Van Zonneveld M, Jarvis A, Dvorak W, Lema G, Leibing C. Climate change impact predictions on Pinus patula and Pinus tecunumanii populations in Mexico and Central America. Forest Ecology and Management 2009; 257(7): 1566-1576. http://dx.doi.org/10.1016/j.foreco.2008.12.027.

Vidaurre G, Lombardi LR, Oliveira JTS, Arantes MDC. Lenho juvenil e adulto e as propriedades da madeira. Floresta e Ambiente 2011; 18(4): 469-480. http://dx.doi.org/10.4322/floram.2011.066.

Vieira MC, Brito EO, Gonçalves FG. Evolução econômica do painel compensado no Brasil e no mundo. Floresta e Ambiente 2012; 19(3): 277-285. http://dx.doi.org/10.4322/floram.2012.033.

Wilson JB, Dancer ER. Gate-to-gate life-cycle inventory of laminated veneer lumber production. Wood and Fiber Science 2005; 37(N. esp.):114-127.
 

5e3178620e8825001628e7b6 floram Articles
Links & Downloads

FLORAM

Share this page
Page Sections