Floresta e Ambiente
https://www.floram.org/article/doi/10.1590/2179-8087.005219
Floresta e Ambiente
Original Article Wood Science and Technology

Comparison between Resistograph Analysis with Physical Properties of the Wood of Brazilian Native Tree Species

Carlos Eduardo Silveira da Silva; José Henrique Camargo Pace; Fernando José Borges Gomes; Paulo César Leal de Carvalho; Claudia de Azevedo Reis; João Vicente de Figueiredo Latorraca; Samir Gonçalves Rolim; Alexandre Monteiro de Carvalho

Downloads: 1
Views: 1048

Abstract

ABSTRACT: There is just little information about the technological aspects of the wood of Brazilian native tree species, which limits their suitable use. The objective of this study was to evaluate the resistograph amplitudes of the wood from six native tree species in different wood density classes, and correlate them with their wood densities to demonstrate the efficiency of this nondestructive technique. The results of the resistograph analysis divided the species into three classes. Analyses of basic and bulk densities of their wood showed statistically significant differences among the evaluated samples that divided them into four classes. The comparison of resistograph method and observed densities showed only a slight difference among the density classes. Therefore, it was found in this study that resistograph analysis may be used for explaining wood properties as well as achieving satisfactory correlations with their actual values, especially the physical properties of species with high wood density.

Keywords

nondestructive method, density, Brazilian species

References

Acuña L, Basterra LA, Casado MM, López G, Ramón-Cueto G, Relea E, et al. Application of resistograph to obtain the density and to differentiate wood species. Materiales de Construcción 2011; 61(303): 451-464.

Associação Brasileira de Normas Técnicas – ABNT. NBR 7190:1997: Projetos de Estruturas de Madeira. Rio de Janeiro: ABNT; 1997.

Carrasco EVM, Pereira NCS, Alves RC. Estimativa da densidade aparente, resistência à compressão e módulo de elasticidade da madeira por meio do resistógrafo. Revista Construindo 2013; 5(1): 45-51.

Chen Y, Guo W. Mechanical properties evaluation of two wood species of ancient timber structure with nondestructive testing methods. BioResources 2016; 11(3): 6600-6612. http://dx.doi.org/10.15376/biores.11.3.6600-6612.

Couto AM, Trugilho PF, Neves TA, Protásio TP, Sá VA. Modeling of Basic Density of wood from Eucalyptus grandis and Eucalyptus urophylla using nondestructive methods. Revista Ceres 2013; 19(1): 27-34.

Dias DC, Colodette JL, Thiersch CR, Leite HG, Gomide JL. Uso da técnica de resistografia e de variáveis dendrométricas na modelagem da densidade básica de povoamentos clonais de Eucalyptus. Revista Ciência Florestal 2017; 27(2): 609-619. http://dx.doi.org/10.5902/1980509827746.

Eckard J, Isik F, Bullock B, Li B, Gumpertz M. Selection efficiency for solid wood traits in Pinus taeda using time-of-flight acoustic and micro-drill resistance methods. Forest Science 2010; 56(3): 233-241.

Glass SV, Zelinka SL. Moisture relations and physical properties of wood. In: Glass SV, Zelinka SL. Wood handbook: wood as an engineering material. Madison: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory; 2010.

Gouvêa AFG, Trugilho PF, Gomide JL, Silva JRM, Andrade CR, Alves ICN. Determinação da densidade básica da madeira de Eucalyptus por diferentes métodos não destrutivos. Revista Árvore 2011; 35(2): 349-358. http://dx.doi.org/10.1590/S0100-67622011000200019.

Instituto de Pesquisas Tecnológicas – IPT. Madeira: o que é e como pode ser processada e utilizada. São Paulo: IPT; 1985. p. 1-189. (Boletim ABPM; no. 36).

Jasiénko J, Nowak T, Hamrol K. Selected methods of diagnosis of historic timber structures - principles and possibilities of assessment-. Advanced Materials Research 2013; 778: 225-232. http://dx.doi.org/10.4028/www.scientific.net/AMR.778.225.

Kahl T, Wirth C, Mund M, Böhnisch G, Schulze E-D. Using drill resistance to quantify the density in coarse woody debris of Norway spruce. European Journal of Forest Research 2009; 128(5): 467-473. http://dx.doi.org/10.1007/s10342-009-0294-2.

Kretschmann DE. The influence of juvenile wood content on shear parallel, compression, and tension perpendicular to grain strength and mode I fracture toughness of loblolly pine at various ring orientation. Forest Products Journal 2008; 58(7/8): 89-96.

Logsdon NB, Calil C Jr. Influência da umidade nas propriedades de resistência e rigidez da madeira. Cadernos de Engenharia de Estruturas 2002; 18: 77-107.

Lorenzi H. Árvores brasileiras: manual de identificação e cultivo de plantas arbóreas nativas do Brasil. Vol. 1. Nova Odessa: Editora Plantarum Ltda; 1992. 368 p.

Oliveira BRU, Latorraca JVF, Tomazello M Fo, Palermo GPM, Carvalho AM, Pastro MS. Microdensitometria de raios X aplicada na determinação da variação da densidade do lenho de árvores de Eucalyptus grandis W. Hill. Revista Scientia Forestalis 2011; 40(93): 103-112.

Ribeiro MC, Metzger JP, Martensen AC, Ponzoni FJ, Hirota MM. The Brazilian Atlantic Forest: how much is left, and how is the remaining forest distributed? Implications for conservation. Biological Conservation 2009; 142(6): 1141-1153. http://dx.doi.org/10.1016/j.biocon.2009.02.021.

Rinn F. Basics of micro-resistance drilling for timber inspection. Holztechnologie 2012; 53(3): 24-29.

Rolim SG, Piotto D. Silvicultura e tecnologia de espécies da mata atlântica. Belo Horizonte: Editora Rona; 2018. 160 p.

Santos CM, Lima IL, Longui EL, Romeiro D, Zanatto ACS, Morais E, et al. A densidade básica e caracteristicas anatômicas variam radialmente na madeira de Astronium graveolens Jacq. (Anacardiaceae). Revista do Instituto Florestal 2011; 23(2): 191-201.

Shimamoto CY, Botosso PC, Marques CM. How much carbon is sequestered during the restoration of tropical forests? estimates from tree species in the Brazilian Atlantic Forest. Forest Ecology and Management 2014; 329: 1-9. http://dx.doi.org/10.1016/j.foreco.2014.06.002.

Silva CESS, Xavier CN, Santos PV, Carvalho AM, Latorraca JVF, Brancalion PHS. Estimativa da densidade da madeira em árvores vivas de Cedrela fissilis Vell. através de resistografia. Revista Scientia Forestalis 2017; 45(113): 139-144. http://dx.doi.org/10.18671/scifor.v45n113.13.

Silva DB, Lemos BS. Plantas da área verde da Super Quadra. Brasília: Embrapa Recursos Genéticos e Biotecnologia; 2002. 147 p.

Tannert T, Anthony R, Kasal B, Kloiber M, Piazza M, Riggio M, et al. In situ assessment of structural timber using semi-destructive techniques. Materials and Structures 2014; 47(5): 767-785. http://dx.doi.org/10.1617/s11527-013-0094-5.

Wu S-J, Xu J-M, Li G-Y, Risto V, Lu Z, Li B, et al. Use of the pilodyn for assessing wood properties in standing trees of Eucalyptus Clones. Journal of Forestry Research 2010; 21(1): 68-72. http://dx.doi.org/10.1007/s11676-010-0011-5.

Zhang J, Xu QF, Xu YX, Zhang M. Research on residual bending capacities of used wood members based on the correlation between non-destructive testing results and the mechanical properties of wood. Journal of Zhejiang University - Science A (Applied Physics & Engineering) 2015; 16(7):541-550.
 

5e2f2eff0e882520608e9ef0 floram Articles
Links & Downloads

FLORAM

Share this page
Page Sections