25APR

FLORAM receives Impact Factor

We are pleased to announce that FLORAM has received its first impact factor rating in the 2022 Journal Citation Reports (JCR).

Now FLORAM has the highest impact factor among Brazilian Forest Sciences journals.
Floresta e Ambiente
https://www.floram.org/article/doi/10.1590/2179-8087.008216
Floresta e Ambiente
Original Article Wood Science and Technology

Quantification of Tannins from Curupay Bark

Thaís Brito Sousa; Sebastião Gabriel Souza; Thayane Batistão Bondioli Franco; Márcia Silva de Jesus; Fabio Akira Mori

http://dx.doi.org/10.1590/2179-8087.008216 FLORAM, vol.26, n1, e20160082, 2019
PDF
Downloads: 2
Views: 1140

Abstract

ABSTRACT: This study aimed to assess the influence of time and sodium sulfite concentration on tannin yield in Curupay bark and propose better extraction conditions. The extractions were performed using 100 g of dried bark and 1500 mL of water at 70 °C, with extraction times of 2, 3, and 4 h and amount of extractor salt at the concentrations of 0, 1, 2, 3, and 4%. The following parameters were evaluated: content of total solids, total yield of solids, Stiasny index, and gravimetric yield of condensed tannins and non-tannins. Results show that the higher the concentration of sodium sulfite, the higher the content and yield of solids, as well as the higher the extraction of non-tannin compounds. Three-hour extraction time at 3.0% sodium sulfite concentration was the best condition to extract tannins from Curupay bark, under which a condensed tannin yield of 20.46% was obtained.

Keywords

Anadenanthera peregrina , Stiasny index, extraction

References

Afonso SR. Análise sócio-econômica de produtos florestais não madeireiros (PFNMs) como alternativa para a sustentabilidade do cerrado e os estudos de caso da cooperativa de catadores de pequi de Japonvar (MG). In: Bensusam N, organizador. Unindo sonhos - pesquisas ecossociais no cerrado. Brasília: Instituto de Internacional de Educação do Brasil; 2009. p. 99-113.

Aires A, Carvalho R, Saavedra MJ. Valorization of solid wastes from chestnut industry processing: Extraction and optimization of polyphenols, tannins and ellagitannins and its potential for adhesives, cosmetic and pharmaceutical industry. Waste Management (New York, N.Y.) 2016; 48: 457-464. http://dx.doi.org/10.1016/j.wasman.2015.11.019. PMid:26626811.

Ashok PK, Upadhyaya K. Tannins are astringent. Journal of Pharmacognosy and Phytochemistry 2012; 1(3): 45-50.

Associação Brasileira de Normas Técnicas – ABNT. Projeto de estruturas de madeira. Rio de Janeiro: ABNT; 1997. 107 p.

Beltrán-Heredia J, Sánchez-Martín J, Frutos-Blanco G. Schinopsis balansae tannin-based flocculant in removing sodium dodecyl benzene sulfonate. Separation and Purification Technology 2009; 67(3): 292-303. http://dx.doi.org/10.1016/j.seppur.2009.03.039.

Carneiro ACO, Vital BR, Frederico PGU, Carvalho AMML, Vidaurre GB. Propriedades de chapas de aglomerado fabricadas com adesivo tânico de angico-vermelho (Anadenanthera peregrina) e uréia-formaldeído. Revista Árvore 2009; 33(3): 521-531. http://dx.doi.org/10.1590/S0100-67622009000300014.

Carneiro ACO, Vital BR, Frederico PGU, Moreira AB, Dambroz CS. Efeito do sulfito de sódio na extração de tanino da casca de Anadenanthera peregrina. Floresta e Ambiente 2007; 14(1): 65-69.

Chupin L, Motillon C, Charrier-El Bouhtoury F, Pizzi A, Charrier B. Characterisation of maritime pine (Pinus pinaster) bark tannins extracted under different conditions by spectroscopic methods, FTIR and HPLC. Industrial Crops and Products 2013; 49: 897-903. http://dx.doi.org/10.1016/j.indcrop.2013.06.045.

Deng Y, Liang G, Shi Y, Li H, Zhang J, Mao X et al. Condensed tannins from Ficus altissima leaves: structural, antioxidant, and antityrosinase properties. Process Biochemistry 2016; 51(8): 1092-1099. http://dx.doi.org/10.1016/j.procbio.2016.04.022.

Guangcheng Z, Yunlu L, Yazaki Y. Extractives yields, stiasny values and polyflavonoid contents in barks from six Acacia species in Australian. Australian Forestry 1991; 3(54): 154-156. http://dx.doi.org/10.1080/00049158.1991.10674572.

Hoong YB, Paridah MT, Luqman CA, Koh MP, Loh YF. Fortification of sulphited tannin from the bark of Acacia mangium with phenol-formaldehyde for use as plywood adhesive. Industrial Crops and Products 2009; 30(1): 416-421. http://dx.doi.org/10.1016/j.indcrop.2009.07.012.

Instituto Nacional de Meteorologia do Brasil - INMET. Estação meteorológica de observação de superfície automática [online]. Brasília: INMET; 2015 [cited 2015 Jun 9]. Available at: http://www.inmet.gov.br

Lorenzi H. Árvores brasileiras: manual de identificação e cultivo de plantas arbóreas nativas do Brasil. 2nd. ed. Nova Odessa: Instituto Plantarum; 1998.

Mori FA, Mori CLSO, Mendes LM, Silva JRM, Melo VM. Influência do sulfito e hidróxido de sódio na quantificação em taninos da casca de barbatimão (Stryphnodendron adstringens). Floresta e Ambiente 2003; 10(1): 86-92.

Paes JB, Diniz CEF, Lima CR, Bastos PM, Medeiros Neto PN. Taninos condensados da casca de angico-vermelho (Anadenanthera colubrina var. cebil) extraídos com soluções de hidróxido e sulfito de sódio. Revista Caatinga 2013; 26(3): 22-27.

Pizzi A. Condensed tannins for adhesives. Industrial & Engineering Chemistry Product Research and Development 1982; 21(3): 359-369. http://dx.doi.org/10.1021/i300007a005.

Pizzi A. Wood adhesives: chemistry and technology. New York: Marcell Dekker; 1983.

Pizzi A, Mittal KL. Handbook of adhesive technology. New York: Marcell Dekker; 1994.

Pizzi A. Natural phenolic adhesive I: tannin. In: Pizzi A, Mital KL, editors. Handbook of adhesive technology. 2nd. ed. New York: Marcell Dekker; 2003. http://dx.doi.org/10.1201/9780203912225.ch27.

Sartori CJ, Castro AHF, Mori FA. Teores de fenóis totais e taninos nas cascas de angico-vermelho (Anadenanthera peregrina). Floresta e Ambiente 2014a; 21(3): 394-400. http://dx.doi.org/10.1590/2179-8087.061113.

Sartori CJ, Mori FA, Valle MLA, Mendes LM, Protásio TP. Rendimento gravimétrico em taninos condensados nas cascas de Anadenanthera peregrina em diferentes classes diamétricas. Cerne 2014b; 20(2): 239-244. http://dx.doi.org/10.1590/01047760.201420021512.

Vázquez G, Antorrena G, González J, Alvarez JC. Tannin-based adhesives for bonding high-moisture Eucalyptus veneers: influence of tannin extraction and press conditions. Holz als Roh- und Werkstoff 1996; 54(2): 93-97. http://dx.doi.org/10.1007/s001070050144.

Zarin MA, Wan HY, Isha A, Armania N. Antioxidant, antimicrobial and cytotoxic potential of condensed tannins from Leucaena leucocephala hybrid-Rendang. Food Science and Human Wellness 2016; 5(2): 65-75. http://dx.doi.org/10.1016/j.fshw.2016.02.001.
 

5c4f2f4b0e8825864537958d floram Articles
Links & Downloads
2179-8087 (Electronic)
FLORAM ©2024 All rights reserved.

FLORAM

Share this page
Page Sections