Floresta e Ambiente
https://www.floram.org/article/doi/10.4322/floram.2011.059
Floresta e Ambiente
Original Article Forest Management

Avaliação das Posturas Adotadas em Operações Florestais em Áreas Declivosas

Evaluation of the Postures Adopted in Forestry Operations in Declivous Areas

Fiedler, Nilton César; Barbosa, Renan Pereira; Andreon, Bruno Camata; Gonçalves, Saulo Boldrini; Silva, Elizabeth Neire da

Downloads: 1
Views: 1509

Resumo

Esta pesquisa teve o objetivo de avaliar os fatores que interferem e alteram os modelos biomecânicos posturais adequados durante as etapas de implantação e manutenção florestal, a fim de sugerir a adoção de posturas corretas durante a execução das operações florestais. A pesquisa foi realizada em propriedades rurais no sul do Estado do Espírito Santo, onde há o predomínio de relevo declivoso. As posturas foram analisadas em cada etapa da implantação (roçada semimecanizada, coveamento manual, coveamento semimecanizado, adubação e plantio) e da manutenção florestal (coroamento, adubação, desrama manual e desrama semimecanizada). Os dados foram obtidos utilizando-se vídeo filmagem e analisados por meio do método OWAS de análise de posturas no trabalho, gerando posturas padrões. Baseando-se nos resultados, concluiu-se que as posturas adotadas nas operações de coroamento, coveamento manual, coveamento mecanizado, roçada mecânica e desrama manual foram consideradas críticas, necessitando de correções em futuro próximo.

Palavras-chave

ergonomia florestal, biomecânica, implantação florestal, manutenção florestal.

Abstract

The purpose of this research was to evaluate the factors that intervene and alter the biomechanical models adequate posture during the stage of implantation and forest maintenance, in order to suggest the adoption of the correct posture during the execution of forest operations. The research was carried out in farms in the south of the State of the Espirito Santo, Brazil, where there is a predominance of declivous relief. The postures were analyzed in each stage of the implantation (semi-mechanized mowing, manual and semi-mechanized tillage, fertilization and planting) and of the forest maintenance (crown, fertilization, manual and semi-mechanized pruning). The data were obtained using video filming and were analyzed using the OWAS method of analysis of positions in the work, generating standard postures. Based on the results, it was concluded that the postures adopted in the operations of crown, manual and mechanized tillage, mechanical mowing, and manual pruning were considered critical and need corrections in a near future.

Keywords

ergonomics, biomechanical models, forestry implementation, maintenance.
588e222ee710ab87018b46a3 floram Articles
Links & Downloads

FLORAM

Share this page
Page Sections