14JAN

FLORAM Receives A4 Classification in Qualis Capes

The journal Floresta e Ambiente received an A4 classification in Agricultural Sciences I in the new 2021-2024 four-year period of Qualis Periódicos.

We thank our authors, reviewers, editors, and other collaborators who share this important achievement with us.
Floresta e Ambiente
https://www.floram.org/ed/588e21e9e710ab87018b4585
Floresta e Ambiente



Archive


Volume 19, Issue 2, 2012

19(2), 2012

Research Article

https://doi.org/10.4322/floram.2012.013
vol.19 n2, 117-122 Determination of the Elastic Modulus of Particleboard by Stress Wave Timer Mendes, Rafael Farinassi; Mendes, Lourival Marin; Carvalho, Amelia Guimarães; Junior, José Benedito G.; Mesquita, Ricardo Gabriel de A. Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.014
vol.19 n2, 123-132 Correlations Between Physical and Mechanical Properties of Particleboards from Different Eucalyptus Species Protásio, Thiago de Paula; Junior, José Benedito G.; Mendes, Rafael Farinassi; Mendes, Lourival Marin; Guimarães, Bárbara Maria R. Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.015
vol.19 n2, 133-140 Influence of Veneer Quality on the Mechanical Performance in the Bending of Plywood Made from Hevea brasiliensis Palma, Hernando Alfonso L.; Escobar, Javier Farago; Ballarin, Adriano Wagner; Leonello, Elaine Cristina Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.016
vol.19 n2, 141-146 Shear Strength at the Bondline of Eucalyptus sp. and PVA Adhesive Plywood Ferreira, Bruno Santos; Campos, Cristiane Inácio de; Silva, Marcellus Silveira da; Valarelli, Ivaldo de Domênico Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.017
vol.19 n2, 147-154 Cost of Different Types of Road Transport in the Timber Sector of Itapeva Savi, Antonio Francisco; Caneppele, Fernando de Lima; Oliveira, Marcos Ricardo G. de Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.018
vol.19 n2, 155-161 Layout Analysis of a Furniture Factory Located in Linhares Boa, Ana Carolina; Donatelli, Jordano Soeiro; Andrade, Wendel Sandro de P.; Nogueira, Magda Apda. Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.019
vol.19 n2, 162-170 Numerical Analysis of the Behavior of Timber Elements under Fire Conditions Molina, Julio Cesar; Junior, Carlito Calil; Kimura, Érica Fernanda A.; Pinto, Edna Moura; Regobello, Ronaldo Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.020
vol.19 n2, 171-178 Panel in Reforestation Wood and Particleboards for Rural Facilities Sartori, Diogo de Lucca; Cravo, Julio Cesar M.; Barrero, Nubia Garzon; Fiorelli, Juliano; Junior, Holmer Savastano Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.021
vol.19 n2, 179-183 Influence of the Length of Test Specimens in Obtaining Modulus of Elasticity Ec0 Bertolini, Marilia da Silva; Silva, Diogo Apdo. L; Souza, Amós Magalhães de; Neto, Carlito Calil; Lahr, Francisco Antonio R. Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.022
vol.19 n2, 184-193 Longitudinal Alternative Sampling for Determination of the Basic Density in Eucalyptus sp. Clones Couto, Allan Motta; Protásio, Thiago de Paula; Reis, Aliny Apda. dos; Trugilho, Paulo Fernando Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.023
vol.19 n2, 194-199 Estimation of Microfibrillar Angle in Eucalyptus urophylla × E. grandis Wood by Near Infrared Spectroscopy Hein, Paulo Ricardo G.; Lima, José Tarcisio; Trugilho, Paulo Fernando; Chaix, Gilles Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.024
vol.19 n2, 200-209 Production Design and Pre-fabrication Process of Bamboo Components Pereira, Marco Antonio dos R.; Carrara, Henrique Bragato; Barata, Tomaz Queiroz F.; Valarelli, Ivaldo de Domênico; Azambuja, Maximiliano dos A. Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.025
vol.19 n2, 210-218 Round Eucalypt Structure and Wall Subsystem of Single-family Residence Folz, Rosana Rita; Ino, Akemi Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.026
vol.19 n2, 219-228 "Quarter Log" Construction System for Habitation in the State of Espirito Santo: Product Development Altoé, Emanuella Sossai; Alvarez, Cristina Engel de; Saelzer, Gerardo Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.027
vol.19 n2, 229-235 Quality of Wood and Structural Classification of Hevea brasiliensis Clone GT 1 Leonello, Elaine Cristina; Ballarin, Adriano Wagner; Ohto, Jessica Monari; Palma, Hernando Alfonso L.; Escobar, Javier Farago Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.028
vol.19 n2, 236-242 Adhesion to Wood of Carbon Fiber Reinforced Polymers at High Temperatures Rubini, Lucas; Moraes, Poliana Dias de Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.029
vol.19 n2, 243-249 Modeling of Physical and Mechanical Properties of Australian Red Cedar Particleboards Bufalino, Lina; Protásio, Thiago de Paula; Cesar, Antonia Amanda da S.; Sá, Vânia Apda. de; Mendes, Lourival Marin Research ArticleForest Products
PDF Abstract
https://doi.org/10.4322/floram.2012.030
vol.19 n2, 250-255 Sand Content in Composites Made with Sugarcane Bagasse and Eucalypt Belini, Ugo Leandro; Filho, Mario Tomazello; Mendes, Lourival Marin; Leite, Marta Karina; Lima, Paulo Milton R. de Research ArticleForest Products
PDF Abstract
2179-8087 (Electronic)
FLORAM ©2026 All rights reserved.

FLORAM

Share this page
Page Sections